Monday, October 6, 2014

How to Install a Samson 3277 Actuator on a Samson 3241 Globe Control Valve

This is a complete "how-to" for installing the Samson 3277 actuator on top of a Samson 3241 globe control valve.

The Samson types 3271 and 3277 pneumatic actuators contain a rolling diaphragm and internal springs.

Special features

• Low overall height
• Powerful thrust at high response speed
• Low friction
• Various bench ranges by varying the number of springs or their compression
• No special tools required to change the bench range and to reverse the actuator action (also version with hand-wheel)
• Permissible operating temperatures from –50 to +120 °C
• Direct attachment of accessories on additional yoke for
• Type 3277 with concealed travel pick-off

Samson 3241 Globe Control Valve

The control valves consist of a body with trim, bonnet and pneumatic actuator, optionally with metal bellows or insulating extension. The valves may be also equipped with electric, electro-hydraulic, or hand-operated actuators, as well as control accessories and other instrumentation.


Control valve for process engineering and plants with industrial requirements.
Nominal valve sizes 1⁄2” to 10” (15 to 250 mm) Pressure ratings ANSI Class 125 to 300
Temperatures −320 °F to +800 °F (−196 °C to +427 °C)


• Modular design, rugged and heavy duty construction, full range of body and trim materials
• One-piece ultra-rigid valve bonnet and yoke up to size 6”
• Field retrofittable extension bonnets and metal bellows seals
• Many configurations, e.g. Cryogenic or ‘Lethal service’
• Self-adjusting, live-loaded PTFE V-ring stuffing box
• Port-guided V-port asymmetric plugs above CV 20 standard
• Excellent dynamic response and high trim stability
• Self-locking seats, exchangeable for various CV values
• Low height, reversible, multi-spring/rolling diaphragm actuator
• NAMUR (IEC 534-6) accessory mounting standard
• Complete selection of actuators options, positioners and control accessories

Installing a SAMSON 3277 Actuator to a 2" Samson 3241 Globe Control Valve

In this video, we'll describe how to install a SAMSON 3277 actuator to a 2" 3241 globe valve. The actuator in this example fails closed and is a size 350cm with a 3-15psi spring range.

Step by Step Instructions:

1. Begin by carefully placing the actuator onto the valve bonnet to avoid thread damage.

2. For this example we're using a 3-15 psi actuator, apply approximately 20psi to retract the stem. This allows us to install the ring nut without causing any damage to the plug and seat sealing surfaces. Thread on the ring nut and lock into position.

3. To set the bench range, apply a pressure equal to the lower bench range; 3 psi in our case.

4. Push down on the plug to make sure it’s firmly pressed into the seat. Raise the stem connector nut until it makes contact with the actuator stem and add an additional ¼ turn. Then, raise the lock nut and secure into position with two wrenches.

5. The stem connector clamp is now installed to mechanically link the actuator stem to the plug.

6. If necessary, adjust the travel indicator to the correct position.

7. Actuator installation is now complete.


  1. Nice reading, I love your content. This is really a fantastic and informative post. Keep it up and if you are looking for Bellow seal globe valve then visit NTGD VALVE.

  2. I wanted to thank you for this great Information and knowledge, I definitely loved every little bit of it. I have you bookmarked your web site to check out the latest stuff you post. Your blog is eye-catching. I get pleasure from it. Thanks for sharing this beautiful piece of writing with me, get more information at Stainless Steel Welded Pipe manufacturer in India for more Oshwin Overseas related information and knowledge.

  3. This comment has been removed by the author.

  4. Thanks for such a pleasant post. This post loaded with lots of useful information. Keep it up. If you are looking for the best information and suggestions related to titanium fasteners manufacturers in india then visit VIHA STEEL & FORGING.

  5. This comment has been removed by the author.

  6. I appreciate the time and effort us put into this post. This article gives you a clear idea about Thermistors. It is, without a doubt, an informative article that will help us expand our knowledge. Thank you for bringing such interesting posts to our attention.
    Defense Linear Motor

  7. It is a proficient article that you have shared here about actuator. I got some unique and valuable information from your article. Thankful to you for sharing this article here.
    Linear induction motor

  8. This post is gives very useful tips for us which is effective our thoughts. Define step by step process that easily understand by us astm a193 grade b7 If you wants more related services then must visit Jignesh Steel.